Small-sized sensors E'lemer AIR-10H, AIR-10U, AIR-10P

Small-sized microprocessor-based 8-band pressure sensors with support for the HART protocol, which provides the possibility of integrating sensors into modern automated process control systems (ACS). The sensors are designed for continuous conversion of absolute pressure, overpressure, overpressure-discharge, differential pressure into a unified output current signal of 4...20 mA and/or a digital signal in the standard of the HART protocol. The sensors are equipped with a wide range of terminal heads for electrical connection to the process. Terminal heads have different types of materials: special plastic (GSP), aluminum alloy (AG-14). AIR-10H have the ability to install the LED indicator ITC 420(Ex)/ M4-1 or ITC 420(Ex)/ M4-2. The sensors have high noise immunity — EMC group III—A(B), IV-A(B).

Main characteristics of AIR-10H Upper limits of measurements:

• absolute pressure (YES) — 4 kPa...2.5 MPa;
• The overpressure (DI) is 0.4 kPa...60 MPa;
• excess pressure-vacuum (DIV) — ± 5 kPa...(-0.1...+2.4) MPa;
• differential pressure (DD) — 0.4 kPa...2.5 MPa;
• The depth of range reconfiguration is 25:1;
• The output signal is 4...20 mA and HART;
• Configuration — HART protocol;
• Square root extraction function;
• The error is from ± 0.1 %;
• Climatic versions — B4 (+5...+50 °C), C2 (-40...+70 °C), C3 (-10...+50 °C, -10...+70°C, –25...+70 °C), OHM (-40...+70 °C);
• Dust and moisture protection — IP65;
• Variants of execution — general industrial, "Ex" (ExiaIICT6 X), "Exd" (1ExdIICT6), OM (River and Sea Registers of the Russian Federation);
• Indication — ITC 420(Ex)/M4-1 or ITC 420(Ex)/M4-2 (only for GSP connector);
• Electromagnetic Compatibility (EMC) — III-A(B), IV-A(B);
• The warranty is 5 years.

DOCUMENTATION

• AIR-10H. Passport.
• AIR-10H. Leaflet.
• AIR-10H. Operation manual.

---

Small-sized microprocessor pressure sensors with a digital signal according to the MVU ASCII protocol (AIR-10U) and with a voltage output signal (AIR-10P) provide the possibility of integrating sensors into modern automated process control systems (automated process control systems). The sensors are designed for continuous conversion of absolute pressure, overpressure, overpressure-discharge, differential pressure into a unified voltage output signal in the range of 0...5 V or into a digital signal using the MVU ASCII protocol.

• AIR-10U, AIR-10P. Operation manual.
• AIR-10U, AIR-10P. Order form.

---

• Pressure transmitters measuring AIR-10. Description of the type of measuring instrument.
• Pressure transmitters measuring AIR-10U, AIR-10P. Description of the type of measuring instrument.

Questionnaire